TM-9-2320-260-34-2

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME 2 OF 2

JULY 1994

TM-9-2320-260-34-2 - Page 394 of 863

TM 9-2320-260-34-2

THIS TASK COVERS:

a. Removal

b. Installation

INITIAL SETUP

APPLICABLE MODELS

M820, M820A2

TEST EQUIPMENT

Multimeter (Appendix B, Item 115)

REFERENCES (TM)

TM 9-2320-260-10

TM 9-2320-260-20

TM 9-2320-260-34P-2

EQUIPMENT CONDITION

TOOLS

General mechanic’s tool kit

(Appendix B, Item 1)

Tool kit, electrical (Appendix B, Item 106)

●

External power source disconnected

(TM 9-2320-260-10).

●

Battery ground cable disconnected

(TM 9-2320-260-20).

●

Emergency and blackout lamps removed

(TM 9-2320-260-20).

NOTE

Tag wires; cables, and leads for installation.

1. Remove four screws (7) and housing (6) from van ceiling (3).

2. Remove four screws (1), two jumper cables (5),

and wiring harness leads (2) and (4) from housing (6).

1. Install two jumper cables (5) and wiring harness leads (2) and (4) on housing (6) with four

screws (1).

2.

Install housing (6) on van ceiling (3) with four screws (7).

FOLLOW-ON TASKS:

●

Install emergency and blackout lamps (TM 9-2320-260-20).

●

Connect battery ground cable (TM 9-2320-260-20).

●

Connect external power source (TM 9-2320-260-10).

15-333

15-91. BLACKOUT AND EMERGENCY LIGHT FIXTURES RELACEMENT