TM-9-2320-272-23-1
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 1 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-1 - Page 770 of 1313
NO OR LOW ALTERNATOR OUTPUT - Continued
VEHICLE DIAGNOSTIC
CONNECTOR
ABS DIAGNOSTIC CONNECTOR
T0055DAA
Figure 2.
DCA Connector.
c.
Connect multimeter red lead to vehicle DCA connector, terminal N. Refer to point to point schematics.
d.
Connect multimeter black lead to vehicle DCA connector, terminal P.
e.
Start engine and run at fast idle.
f.
Meter reading should be between 26.5 and 29.5 VDC.
CONDITION/INDICATION
IS THE ALTERNATOR OUTPUT VOLTAGE NORMAL?
DECISION
NO - Go to Step (3).
YES - Go to Step (4).
TM 9-2320-272-23-1
0089
0089-3
Back to Top
