TM-9-2320-272-23-2
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 2 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-2 - Page 1270 of 1417
REMOVAL (M936/A1/A2)
NOTE
Left and right composite lights and brackets are replaced the same way.
1.
Remove two locknuts (Figure 5, Item 4), screws (Figure 5, Item 6), and reflector (Figure 5, Item 5) from taillight
guard (Figure 5, Item 1). Discard locknuts.
2.
Remove four screws (Figure 5, Item 3), lockwashers (Figure 5, Item 2), and taillight guard (Figure 5, Item 1)
from bracket (Figure 5, Item 12). Discard lockwasher.
NOTE
Tag wires for installation.
3.
Disconnect four connectors (Figure 5, Item 7) from wires (Figure 5, Item 8).
4.
Remove two screw assembled lockwashers (Figure 5, Item 10) and rear composite light (Figure 5, Item 9) from
bracket (Figure 5, Item 12).
5.
Remove two locknuts (Figure 5, Item 11), screws (Figure 5, Item 14), and bracket (Figure 5, Item 12) from
ladder bracket (Figure 5, Item 13). Discard locknuts.
21
5
4
3
2
1
14
13
12
9
11
10
6
7
8
23
24
22-460
22-461
21
23
24
22-460
22-461
M8008DAA
Figure 5.
Rear Composite Light Removal.
END OF TASK
TM 9-2320-272-23-2
0327
0327-7
Back to Top
