REMOVAL
WARNING
Remove all jewelry. If jewelry or disconnected battery ground cable contacts positive battery
terminal, a direct short will result. Failure to comply may result in damage to equipment, injury,
or death to personnel.
NOTE
•
All battery cables and terminal adapters are replaced the same way.
•
Tag cables for installation.
•
Refer to TM 9-6140-200-14 for inspection and service of battery cables and adapters.
1.
Remove nut (Figure 1, Item 1) and screw (Figure 1, Item 6) from terminal adapter (Figure 1, Item 4).
2.
Remove terminal adapter (Figure 1, Item 4) and rubber boot (Figure 1, Item 8) from battery post
(Figure
1,
Item
7).
3.
Remove nut (Figure 1, Item 2), screw (Figure 1, Item 5), and two battery cables (Figure 1, Item 3) from terminal
adapter (Figure 1, Item 4).
TM 9-2320-272-23-2
0349
0349-2