TM-9-2320-272-23-2

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 2 OF 5

SEPTEMBER 2012

TM-9-2320-272-23-2 - Page 1393 of 1417

INSTALLATION

WARNING

When performing battery maintenance, ensure batteries are seated and clamped down, all

rubber boots are installed, clamps are well down on battery posts, and all battery cables lie

flat against top of batteries. Failure to comply may result in damage to equipment, injury, or

death to personnel.

NOTE

•

When installing one cable to a terminal adapter, place the cable under the bolt head.

•

When installing two cables, place one cable on each side of the terminal adapter.

1.

Install rubber boot (Figure 2, Item 8) on battery post (Figure 2, Item 7).

2.

Install two cables (Figure 2, Item 3) on terminal adapter (Figure 2, Item 4) with screw (Figure 2, Item 5) and

nut (Figure 2, Item 2).

3.

Install terminal adapter (Figure 2, Item 4) on battery post (Figure 2, Item 7) with screw (Figure 2, Item 6) and

nut (Figure 2, Item 1).

TM 9-2320-272-23-2

0349

0349-4