TM-9-2320-272-23-2
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 2 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-2 - Page 1387 of 1417
REMOVAL
WARNING
•
When performing battery maintenance, ensure batteries are seated and clamped down,
all rubber boots are installed, clamps are well down on battery posts, and all battery
cables lie flat against top of batteries. Failure to comply may result in damage to
equipment, injury, or death to personnel.
•
Remove all jewelry. If jewelry or disconnected battery ground cable contacts positive
battery terminal, a direct short will result. Failure to comply may result in damage to
equipment, injury, or death to personnel.
NOTE
Assistant will hold battery box cover open while mechanic removes support rod.
1.
Release two latches (Figure 1, Item 5) and raise battery box cover (Figure 1, Item 1).
2.
Remove six locknuts (Figure 1, Item 4), screws (Figure 1, Item 2), and battery box cover (Figure 1, Item 1)
from battery box cover hinge (Figure 1, Item 3). Discard locknuts.
M8029DAA
1
2
3
4
5
1
Figure 1.
Battery Box Cover Removal.
END OF TASK
TM 9-2320-272-23-2
0348
0348-2
Back to Top
