TM-9-2320-272-23-2
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 2 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-2 - Page 1379 of 1417
INSPECTION AND CLEANING
NOTE
Refer to TM 9-6140-200-14 for battery inspection and service.
Inspect battery box (Figure 2, Item 1) for corrosion and acid deposits. If found:
a.
Apply sodium bicarbonate and water solution to inside of battery box to neutralize acid.
b.
Let solution set for five minutes.
c.
Rinse with clean water.
d.
Wipe dry with clean rag.
M8034DAA
1
Figure 2.
Battery Inspection and Cleaning.
END OF TASK
INSTALLATION
1.
Install ten battery tiedown bolts (Figure 3, Item 4) in battery box (Figure 3, Item 2).
NOTE
Assistant will help with Step (2).
2.
Lower four batteries (Figure 3, Item 3) into battery box (Figure 3, Item 2).
3.
Install two battery tiedowns (Figure 3, Item 1) over ten bolts (Figure 3, Item 4) with washers (Figure 3, Item 5),
lockwashers (Figure 3, Item 6), and nuts (Figure 3, Item 7).
4.
Install eight rubber boots (Figure 3, Item 11) on batteries (Figure 3, Item 3).
5.
Install six terminal adapters (Figure 3, Item 8) on batteries (Figure 3, Item 3) and tighten screws
(Figure
3,
Item
10) and nuts (Figure 3, Item 9).
TM 9-2320-272-23-2
0346
0346-4
Back to Top
