TM-9-2320-272-23-2

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 2 OF 5

SEPTEMBER 2012

TM-9-2320-272-23-2 - Page 1377 of 1417

REMOVAL

WARNING

Remove all jewelry when working on electrical circuits. Jewelry coming in contact with

electrical circuits may produce a short circuit, causing extreme heat, explosions, and fling

particles of metal. Failure to comply may result in damage to equipment, injury, or death to

personnel.

1.

Loosen six nuts (Figure 1, Item 9) and screws (Figure 1, Item 10) on terminal adapters (Figure 1, Item 8).

NOTE

Tag all cables for installation.

2.

Remove six terminal adapters (Figure 1, Item 8) and eight rubber boots (Figure 1, Item 11) from four batteries

(Figure 1, Item 3).

3.

Remove ten nuts (Figure 1, Item 7), lockwashers (Figure 1, Item 6), and washers (Figure 1, Item 5) from battery

tiedown bolts (Figure 1, Item 4). Discard lockwashers.

4.

Remove two battery tiedowns (Figure 1, Item 1) from battery box (Figure 1, Item 2).

NOTE

Assistant will help with Step (5).

5.

Remove four batteries (Figure 1, Item 3) from battery box (Figure 1, Item 2).

6.

Remove ten battery tiedown bolts (Figure 1, Item 4) from battery box (Figure 1, Item 2).

TM 9-2320-272-23-2

0346

0346-2