TM-9-2320-272-23-2
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 2 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-2 - Page 1383 of 1417
REMOVAL
1.
Pull slave receptacle cables (Figure 1, Item 12) and (Figure 1, Item 13) through grommets (Figure 1, Item 14)
on right rear of cab (Figure 1, Item 11).
2.
Loosen two clamps (Figure 1, Item 5) on hose (Figure 1, Item 2).
3.
Remove hose (Figure 1, Item 2) from battery box (Figure 1, Item 6) and right rear of cab (Figure 1, Item 11).
4.
Remove wood battery support blocks (Figure 1, Item 1) from battery box (Figure 1, Item 6).
5.
Remove four screws (Figure 1, Item 3) and lockwashers (Figure 1, Item 4) from battery box (Figure 1, Item 6).
Discard lockwashers.
6.
Push battery cables (Figure 1, Item 7) through grommets (Figure 1, Item 8). Remove battery box
(Figure
1,
Item
6) from right rear of cab (Figure 1, Item 11) and vent tube (Figure 1, Item 9) comes out of hole
in cab floor (Figure 1, Item 10).
7.
Remove four grommets (Figure 1, Item 14) and two grommets (Figure 1, Item 8) from battery box
(Figure
1,
Item
6).
M8039DAA
1
2
3
4
5
6
7
8
9
10
11
12
13
14
5
Figure 1.
Battery Box Removal.
END OF TASK
TM 9-2320-272-23-2
0347
0347-2
Back to Top
