PRELIMINARY DISCONNECTIONS - Continued
32.
Remove two screws (Figure 6, Item 8), washers (Figure 6, Item 9), clamps (Figure 6, Items 5, 7, and 10), and
air line (Figure 6, Item 4) from air intake manifold (Figure 6, Item 3).
33.
Remove tachometer cable (Figure 6, Item 6), speedometer cable (Figure 6, Item 11), and harness
(Figure
6,
Item 12) from air intake manifold (Figure 6, Item 3). Tie cables and harness clear of engine.
34.
Disconnect two connectors (Figure 6, Item 2) from ether start switch (Figure 6, Item 1).
TM 9-2320-272-23-2
0211
0211-10