PRELIMINARY DISCONNECTIONS - Continued
39.
Remove nut (Figure 8, Item 12), washer (Figure 8, Item 13), and wires (Figure 8, Items 11 and 14) from starter
solenoid (Figure 8, Item 4). Tie wires clear of engine.
40.
Remove screw (Figure 8, Item 3), clip (Figure 8, Item 2), and wire (Figure 8, Item 1) from starter solenoid
(Figure 8, Item 4). Tie wire clear of engine.
41.
Remove nut (Figure 8, Item 8), washer (Figure 8, Item 9), wires (Figure 8, Items 7 and 10), and ground strap
(Figure 8, Item 6) from starter motor (Figure 8, Item 5). Tie wires clear of engine.
42.
Disconnect air line (Figure 8, Item 15) from fitting (Figure 8, Item 16).
TM 9-2320-272-23-2
0211
0211-14