TM-9-2320-272-23-2

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 2 OF 5

SEPTEMBER 2012

TM-9-2320-272-23-2 - Page 419 of 1417

PRELIMINARY DISCONNECTIONS - Continued

57.

Remove screw (Figure 12, Item 7), lockwasher (Figure 12, Item 6), washer (Figure 12, Item 5), ground strap

(Figure 12, Item 4), and lockwasher (Figure 12, Item 3) from air compressor (Figure 12, Item 2). Discard

lockwashers. Tie ground strap clear of engine (Figure 12, Item 1).

58.

Remove screw assembled washer (Figure 12, Item 9), ground wire (Figure 12, Item 10), ground strap

(Figure

12, Item 11), and lockwasher (Figure 12, Item 12) from air intake manifold (Figure 12, Item 8). Discard

lockwasher. Tie ground strap and ground wire clear of engine (Figure 12, Item 1).

NOTE

Step (59) is performed only on vehicles equipped with front winch with level wind.

59.

Remove four screws (Figure 12, Item 14), lockwashers (Figure 12, Item 15), and winch level wind

(Figure

12,

Item 13) from winch (Figure 12, Item 16). Discard lockwashers. Place winch level wind clear of

vehicle.

END OF TASK

REMOVAL

1.

Remove two screws (Figure 12, Item 17) and lockwashers (Figure 12, Item 18) from transmission rear support

bracket (Figure 12, Item 19). Discard lockwashers.

TM 9-2320-272-23-2

0211

0211-22