REMOVAL - Continued
WARNING
•
All personnel not participating in engine removal must stand clear during hoisting
operations. A snapped cable, or swinging or shifting load, may occur. Failure to comply
may result in injury or death to personnel.
•
Do not use hands to free engine of hangups. Use tanker or prybars. Failure to comply
may result in injury or death to personnel.
CAUTION
Always remove engine slowly. Lift out of chassis in short lifts and closely observe all engine
and transmission attachments during removal to prevent damage to equipment.
NOTE
•
Mechanic will direct all hoisting operations in Steps (7) through (10) while assistant
operates hoist or assists mechanic.
•
Chain hoist must be adjusted to lower rear of transmission downward so engine is
suspended at approximately a 15° to 20° angle to clear front axle.
7.
Using socket wrench, adjust engine angle to 15° to 20° with adjustable chain hoist (Figure 13, Item 9).
8.
Lift engine (Figure 13, Item 7) slowly upward until clear of vehicle.
TM 9-2320-272-23-2
0211
0211-25