TM-9-2320-272-23-2

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 2 OF 5

SEPTEMBER 2012

TM-9-2320-272-23-2 - Page 413 of 1417

PRELIMINARY DISCONNECTIONS - Continued

NOTE

Access for Steps (43) through (45) is through door in cab floor.

43.

Disconnect wire (Figure 9, Item 2) from transmission oil temperature sending unit (Figure 9, Item 1). Tie wire

clear of transmission.

44.

Disconnect wires (Figure 9, Items 2 and 5) from two clips (Figure 9, Item 3) on transmission flange

(Figure

9,

Item 4). Tie wires clear of transmission.

45.

Remove transmission dipstick (Figure 9, Item 7) from tube (Figure

9,

Item 6). Plug opening in tube.

NOTE

Perform Step (46) and (47) only on vehicles equipped with a transmission

Power

Takeoff

(PTO).

46.

Remove two nuts (Figure 9, Item 8), screws (Figure 9, Item 12), retaining strap (Figure 9, Item 11), and spacer

plate (Figure 9, Item 10) from PTO cable (Figure 9, Item 13) and bracket (Figure 9, Item 9).

47.

Remove cotter pin (Figure 9, Item 17), washer (Figure 9, Item 16), cable pin (Figure 9, Item 14), and PTO cable

(Figure 9, Item 13) from PTO select lever (Figure 9, Item 15). Discard cotter pin, and tie PTO cable clear of

transmission.

TM 9-2320-272-23-2

0211

0211-16