TM-9-2320-272-23-2

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 2 OF 5

SEPTEMBER 2012

TM-9-2320-272-23-2 - Page 415 of 1417

PRELIMINARY DISCONNECTIONS - Continued

48.

Disconnect breather vent line (Figure 10, Item 3) from adapter elbow (Figure 10, Item 2). Tie breather vent line

clear of transmission (Figure 10, Item 1).

49.

Remove two locknuts (Figure 10, Item 5), U-bolt (Figure 10, Item 7), and shim (Figure 10, Item 6) from support

bracket (Figure 10, Item 4) and cable (Figure 10, Item 8). Discard locknuts.

50.

Remove cotter pin (Figure 10, Item 10) and cable pin (Figure 10, Item 9) from shift lever (Figure 10, Item 11).

Discard cotter pin and tie cable (Figure 10, Item 8) clear of transmission (Figure

10,

Item

1).

51.

Disconnect wire (Figure 10, Item 13) and 5th gear lock-in solenoid (Figure 10, Item 14) from connector

(Figure

10, Item 15). Tie wire to transmission (Figure 10, Item 1).

52.

Disconnect transorb diode wire (Figure 10, Item 12) from connector (Figure 10, Item 15).

TM 9-2320-272-23-2

0211

0211-18