TM-9-2320-272-23-3
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 3 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-3 - Page 1204 of 1469
SECTOR SHAFT ADJUSTMENT - Continued
3.
Loosen jamnut (Figure 2, Item 5) on right side of steering gear (Figure 2, Item 2).
4.
Tighten sector shaft adjusting screw (Figure 2, Item 1) 10 lb-ft (14 N·m).
5.
Turn sector shaft adjusting screw (Figure 2, Item 1) counterclockwise one full turn.
6.
Holding adjusting screw (Figure 2, Item 1), tighten jamnut (Figure 2, Item 5) 40 to 45 lb-ft (54 to 61 N·m).
1
5
4
3
2
M3230DAA
Figure 2.
Sector Shaft Adjustment (On-Vehicle).
END OF TASK
TM 9-2320-272-23-3
0509
0509-3
Back to Top
