TM-9-2320-272-23-3
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 3 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-3 - Page 1217 of 1469
REMOVAL
1.
Remove three locknuts (Figure 1, Item 5), screws (Figure 1, Item 1), and washers (Figure 1, Item 2) from stone
shield (Figure 1, Item 11), frame rail (Figure 1, Item 13), and transmission oil cooler support
(Figure
1,
Item
12). Discard locknuts.
2.
Remove locknut (Figure 1, Item 4), cable clamp (Figure 1, Item 3), screw (Figure 1, Item 8), and washer
(Figure
1,
Item
9) from stone shield (Figure 1, Item 11) and transmission oil cooler support
(Figure
1,
Item
12). Discard locknut.
3.
Remove locknut (Figure 1, Item 4), screw (Figure 1, Item 7), and washer (Figure 1, Item 6) from stone shield
(Figure 1, Item 11). Discard locknut.
4.
Remove two screws (Figure 1, Item 7), washers (Figure 1, Item 6), splash shield guide (Figure 1, Item 10),
and stone shield (Figure 1, Item 11) from transmission oil cooler support (Figure 1, Item 12).
M5034DAA
6
6
7
7
8
9
10
11
12
13
5
5
4
4
3
2
2
1
1
Figure 1.
Steering Assist Cylinder Stone Shield Removal.
END OF TASK
TM 9-2320-272-23-3
0511
0511-2
Back to Top
