FRONT SPRING REMOVAL
NOTE
Steps (1) through (5) apply to right side of spring only.
1.
Bend tabs (Figure 1, Item 4) of steering cylinder dust cover (Figure 1, Item 3) clear of steering cylinder
(Figure
1,
Item
7) and right side spring hanger (Figure 1, Item 1).
2.
Remove cotter pin (Figure 1, Item 6) from steering cylinder (Figure 1, Item 7). Discard cotter pin.
3.
Back out cylinder adjusting plug (Figure 1, Item 5).
4.
Remove steering cylinder (Figure 1, Item 7) from ball stud (Figure 1, Item 2).
5.
Remove steering cylinder dust cover (Figure 1, Item 3) from ball stud (Figure 1, Item 2).
TM 9-2320-272-23-3
0534
0534-2