TM-9-2320-272-23-3
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 3 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-3 - Page 1352 of 1469
FRONT SPRING REMOVAL - Continued
NOTE
The spring pins in right spring hanger and left spring shackle must be driven out from the
inside. The remaining two pins can be driven out from either side.
10.
Remove pin retaining locknut (Figure 3, Item 5) and screw (Figure 3, Item 2) from spring hanger
(Figure
3,
Item
1). Discard locknut.
11.
Drive pin (Figure 3, Item 4) out of spring hanger (Figure 3, Item 1) and leaf spring eye (Figure 3, Item 3).
12.
Remove pin retaining locknut (Figure 3, Item 9) and screw (Figure 3, Item 7) from spring shackle
(Figure
3,
Item
6). Discard locknut.
13.
Drive pin (Figure 3, Item 10) out of spring shackle (Figure 3, Item 6) and leaf spring eye (Figure 3, Item 8).
14.
Lift spring assembly (Figure 3, Item 14) from lower spring seat (Figure 3, Item 11) and carefully move over
front axle (Figure 3, Item 13) and tie rod (Figure 3, Item 12) to the ground.
1
M9175DAA
3
4
5
2
1
14
13
12
11
6
10
9
8
7
6
Figure 3.
Spring Assembly Removal.
END OF TASK
TM 9-2320-272-23-3
0534
0534-5
Back to Top
