TM-9-2320-272-23-3

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 3 OF 5

SEPTEMBER 2012

TM-9-2320-272-23-3 - Page 157 of 1469

REMOVAL - Continued

35.

Disconnect three wires (Figure 5, Item 2) from high-beam selector switch (Figure 5, Item 3).

NOTE

Perform Step (36) for M929A2, M930A2, M931A2, M932A2, and M936A2 vehicles only.

36.

Disconnect wire (Figure 5, Item 7) from wire (Figure 5, Item 8).

37.

Remove four nuts (Figure 5, Item 4), lockwashers (Figure 5, Item 5), and screws (Figure 5, Item 1) from front

wiring harness connector (Figure 5, Item 6) and rear wiring harness connector (Figure 5, Item 9). Discard

lockwashers.

38.

Disconnect front wiring harness connector (Figure 5, Item 6) from rear wiring harness connector

(Figure

5,

Item

9).

39.

Disconnect wire (Figure 5, Item 14) from parking brake switch wire (Figure 5, Item 15).

40.

Disconnect wire (Figure 5, Item 10) from transfer case switch capacitor lead (Figure 5, Item 11).

NOTE

Perform Step (41) for M936A2 vehicles only.

41.

Disconnect wire (Figure 5, Item 13) from 5th gear lock-up capacitor lead (Figure 5, Item 12).

TM 9-2320-272-23-3

0358

0358-8