TM-9-2320-272-23-3

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 3 OF 5

SEPTEMBER 2012

TM-9-2320-272-23-3 - Page 161 of 1469

REMOVAL - Continued

52.

Disconnect connector (Figure 7, Item 4) from front wheel drive lock-in switch (Figure 7, Item 1).

NOTE

Perform Step (53) for M929A2, M930A2, M931A2, M932A2, and M936A2 vehicles only.

53.

Disconnect three wires (Figure 7, Item 3) from fuel selector switch (Figure 7, Item 2).

54.

Remove four screws (Figure 7, Item 12) and warning light panel (Figure 7, Item 5) from instrument panel

(Figure

7,

Item

6).

55.

Disconnect wire (Figure 7, Item 7) from parking brake indicator light (Figure 7, Item 17).

56.

Disconnect wire (Figure 7, Item 8) from low air pressure indicator light (Figure 7, Item 16).

57.

Disconnect wire (Figure 7, Item 9) from spring brake override indicator light (Figure 7, Item 15).

58.

Disconnect wire (Figure 7, Item 10) from axle lock-in indicator light (Figure 7, Item 14).

59.

Disconnect wire (Figure 7, Item 11) from high-beam indicator light (Figure 7, Item 13).

60.

With selector (Figure 7, Item 19) in N (neutral), remove four screws (Figure 7, Item 23), lockwashers

(Figure

7,

Item

24), and transmission selector (Figure 7, Item 18) from tower (Figure 7, Item 20).

Discard

lockwashers.

61.

Disconnect three wires (Figure 7, Item 22) from wires (Figure 7, Item 21).

TM 9-2320-272-23-3

0358

0358-12