TM-9-2320-272-23-3
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 3 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-3 - Page 251 of 1469
REMOVAL
NOTE
•
Have drainage container ready to catch oil.
•
Use drain pans to retain leaking/draining fluids. Refer to local procedures and plans for
preventing and responding to fluid spills or leaks. Comply with local regulations when
disposing of clean up material and leaked and spilled fluids.
1.
Remove screw (Figure 1, Item 13), retaining bracket (Figure 1, Item 12), modulator (Figure 1, Item 15), and
o-ring (Figure 1, Item 14) from transmission (Figure 1, Item 21). Discard o-ring.
2.
Remove locknut (Figure 1, Item 20), screw (Figure 1, Item 17), speedometer cable clamp (Figure 1, Item 16),
and modulator cable clamp (Figure 1, Item 18) from transmission bracket (Figure 1, Item 19). Discard locknut.
3.
Remove modulator return spring (Figure 1, Item 10) from modulator link (Figure 1, Item 11) and bracket
(Figure
1, Item 4).
4.
Remove two locknuts (Figure 1, Item 5), screws (Figure 1, Item 9), clamp (Figure 1, Item 8), and shim
(Figure
1, Item 7) from bracket (Figure 1, Item 4). Discard locknuts.
5.
Remove locknut (Figure 1, Item 3), screw (Figure 1, Item 1), modulator link (Figure 1, Item 11), and modulator
cable (Figure 1, Item 6) from throttle lever (Figure 1, Item 2) on fuel pump (Figure 1, Item 22). Discard locknut.
6.
Remove modulator link (Figure 1, Item 11) from modulator cable (Figure 1, Item 6).
TM 9-2320-272-23-3
0365
0365-2
Back to Top
