TM-9-2320-272-23-3

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 3 OF 5

SEPTEMBER 2012

TM-9-2320-272-23-3 - Page 275 of 1469

REMOVAL

1.

Remove four screws (Figure 1, Item 14) and lockwashers (Figure 1, Item 15) from control lever console

(Figure

1, Item 16). Discard lockwashers.

2.

Pull select lever assembly (Figure 1, Item 1) away from control lever console (Figure 1, Item 16).

NOTE

Tag leads for installation.

3.

Disconnect three leads (Figure 1, Item 13) from harness leads (Figure 1, Item 12).

4.

Remove two nuts (Figure 1, Item 11), cable clamp (Figure 1, Item 10), shim (Figure 1, Item 8), two screws

(Figure 1, Item 6), and washers (Figure 1, Item 7) from hanger plate (Figure 1, Item 5).

5.

Remove spring clip (Figure 1, Item 2) and pull trunnion (Figure 1, Item 3) and shift cable (Figure 1, Item 9) from

selector lever plate (Figure 1, Item 4).

6.

Remove selector lever assembly (Figure 1, Item 1) from vehicle.

TM 9-2320-272-23-3

0369

0369-2