TM-9-2320-272-23-4
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 4 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-4 - Page 1309 of 1393
INSTALLATION
NOTE
Clean all male pipe and hose threads and wrap with antiseize tape before installation.
1.
Install two brackets (Figure 2, Item 8) on two mounting brackets (Figure 2, Item 11) with five washers
(Figure
2,
Item
6), lockwasher (Figure 2, Item 15), ground wire (Figure 2, Item 14), four screws
(Figure
2,
Item
5), and locknuts (Figure 2, Item 7).
2.
Install heater (Figure 2, Item 1) on bracket (Figure 2, Items 8) with two clamps (Figure 2, Item 2).
3.
Install cotter pin (Figure 2, Item 9) on elbow (Figure 2, Item 10) and exhaust port (Figure 2, Item 13).
4.
Install adapter (Figure 2, Item 3) on heater (Figure 2, Item 1).
5.
Connect hose (Figure 2, Item 4) to adapter (Figure 2, Item 3).
6.
Connect heater harness (Figure 2, Item 12) to fuel burning heater (Figure 2, Item 1).
11
5
14
15
6
11
12
13
1
2
3
10
9
8
7
6
6
5
4
8
6
7
M6148DAA
Figure 2.
Personnel Fuel Burning Heater and Mounting Brackets Installation.
END OF TASK
TM 9-2320-272-23-4
0760
0760-4
Back to Top
