INSTALLATION
NOTE
Surface of cowl vent door opening must be clean, dry, and free of oil and grease before seal
is installed.
1.
Apply thin coat of silicone rubber adhesive to mating surfaces of vent door (Figure 2, Item 2) and weather seal
(Figure
2,
Item
3) and allow to dry until tacky.
2.
Position weather seal (Figure 2, Item 3) into channel (Figure 2, Item 1) of vent door (Figure 2, Item 2) and
press firmly into place.
M5185DAA
2
3
1
Figure 2.
Vent Door Weather Seal Installation.
END OF TASK
END OF WORK PACKAGE
TM 9-2320-272-23-4
0571
0571-3/4 blank