TM-9-2320-272-23-4
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 4 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-4 - Page 599 of 1393
INSTALLATION
1.
Position main wiring harness (Figure 2, Item 10) on van body (Figure 2, Item 18).
2.
Install wire clip (Figure 2, Item 14) on side panel (Figure 2, Item 16) of van body (Figure 2, Item 18) with three
screws (Figure 2, Item 15).
3.
Install grommet (Figure 2, Item 13) on side panel (Figure 2, Item 16).
4.
Install 12 clamps (Figure 2, Item 11) on main wiring harness (Figure 2, Item 10) and van ceiling
(Figure
2,
Item
17) with 12 screws (Figure 2, Item 12).
5.
Install clamp (Figure 2, Item 2) on harnesses (Figure 2, Item 3) and plate (Figure 2, Item 4) with screw
(Figure
2,
Item
1).
6.
Install five wires (Figure 2, Item 20) on 20 amp circuit breakers (Figure 2, Item 9) with three screws
(Figure
2,
Item
19).
7.
Install wire (Figure 2, Item 22) on neutral bus (Figure 2, Item 8) with setscrew (Figure 2, Item 21).
8.
Install three wires (Figure 2, Item 25) on relay (Figure 2, Item 7) with three setscrews (Figure 2, Item 6).
9.
Install cover (Figure 2, Item 24) on load center (Figure 2, Item 5) with six screws (Figure 2, Item 23).
TM 9-2320-272-23-4
0653
0653-4
Back to Top
