TM-9-2320-272-23-4

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 4 OF 5

SEPTEMBER 2012

TM-9-2320-272-23-4 - Page 603 of 1393

REMOVAL

NOTE

Tag cables for installation.

1.

Remove 12 screws (Figure 1, Item 21) and clamps (Figure 1, Item 22) from wiring harness

(Figure 1, Item 23) and van ceiling (Figure 1, Item 1).

2.

Disconnect plug (Figure 1, Item 2) from air conditioner (Figure 1, Item 3).

3.

Remove six screws (Figure 1, Item 15) and cover (Figure 1, Item 14) from load center (Figure 1, Item 9).

4.

Remove screw (Figure 1, Item 17) and clamp (Figure 1, Item 18) from wiring harnesses

(Figure 1, Items 13 and 16) and plate (Figure 1, Item 4).

5.

Remove nut (Figure 1, Item 19), screw (Figure 1, Item 7), two washers (Figure 1, Item 8), cable assembly

(Figure 1, Item 6), ground cable (Figure 1, Item 5), and wiring harness cable (Figure 1, Item 20) from load

center (Figure 1, Item 9).

6.

Remove three screws (Figure 1, Item 11) and wiring harness cables (Figure 1, Item 12) from 30 amp circuit

breaker (Figure 1, Item 10).

7.

Remove wiring harness (Figure 1, Item 13) from load center (Figure 1, Item 9).

TM 9-2320-272-23-4

0654

0654-2