TM-9-2320-272-23-4
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 4 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-4 - Page 77 of 1393
HOOD SUPPORT BAR AND BRACKET REMOVAL
WARNING
Hood must be supported during replacement of hood support bar mounting bracket. Failure
to comply may result in injury or death to personnel.
1.
Remove bar support pin (Figure 1, Item 10) from stowage bracket (Figure 1, Item 5).
2.
Remove cotter pin (Figure 1, Item 14), washer (Figure 1, Item 13), pin (Figure 1, Item 7), and hood support
bar (Figure 1, Item 11) from mounting bracket (Figure 1, Item 12). Discard cotter pin.
3.
Remove locknut (Figure 1, Item 2), washer (Figure 1, Item 3), and spacer (Figure 1, Item 4) from screw
(Figure
1, Item 6). Discard locknut.
4.
Remove screw (Figure 1, Item 6), washer (Figure 1, Item 15), and mounting bracket (Figure 1, Item 12) from
hood (Figure 1, Item 1).
5.
Remove loop link (Figure 1, Item 9) and bar support pin (Figure 1, Item 10) from chain (Figure 1, Item 8).
TM 9-2320-272-23-4
0559
0559-2
Back to Top
