TM-9-2320-272-23-4
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 4 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-4 - Page 81 of 1393
HOOD CROSSMEMBER BRACKET REMOVAL
1.
Remove hood (WP
0565).
2.
Remove two screws (Figure 4, Item 9), lockwashers (Figure 4, Item 1), and trunnion bracket
(Figure
4,
Item
2) from hood crossmember (Figure 4, Item 3). Discard lockwashers.
3.
Remove locknut (Figure 4, Item 4), washer (Figure 4, Item 5), through bolt (Figure 4, Item 7), lower trunnion
bracket (Figure 4, Item 6), and insulator (Figure 4, Item 8) from trunnion bracket (Figure 4, Item 2). Use soft-
faced hammer to remove through bolt (Figure 4, Item 7) if necessary. Discard locknut and insulator.
M5109-1DAA
3
4
5
6
7
8
9
1
2
Figure 4.
Hood Crossmember Bracket Removal.
END OF TASK
TM 9-2320-272-23-4
0559
0559-6
Back to Top
