TM-9-2320-272-23-4
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 4 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-4 - Page 85 of 1393
HOOD HINGE REMOVAL
NOTE
Left and right hood hinges are replaced the same. This procedure is for the left hood hinge.
1.
Remove hood (WP
0565).
2.
Remove cotter pin (Figure 7, Item 7) from hinge pin (Figure 7, Item 3). Discard cotter pin.
NOTE
Ensure hood is supported when hinge pins are removed.
3.
Remove hinge pin (Figure 7, Item 3) from lower hinge (Figure 7, Item 6) and hood (Figure 7, Item 8).
4.
Remove three screw assembled lockwashers (Figure 7, Item 2) and upper hinge half (Figure 7, Item 1) from
hood (Figure 7, Item 8). Discard screw assembled lockwashers.
5.
Remove three screw assembled lockwashers (Figure 7, Item 4) and lower hinge half (Figure 7, Item 6) from
crossmember (Figure 7, Item 5). Discard screw assembled lockwashers.
TM 9-2320-272-23-4
0559
0559-10
Back to Top
