TM-9-2320-272-23-4
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 4 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-4 - Page 89 of 1393
TORSION BARS AND CROSSMEMBERS REMOVAL
1.
Remove hood (WP
0565).
2.
Remove two cotter pins (Figure 9, Item 3) from two hinge pins (Figure 9, Item 5). Discard cotter pins.
3.
Remove four locknuts (Figure 9, Item 7) and screws (Figure 9, Item 2) from two torsion bars (Figure 9, Item 1)
and mounting brackets (Figure 9, Items 8 and 10). Discard locknuts.
NOTE
Ensure hood and crossmember are supported when hinge pins are removed.
4.
Remove two hinge pins (Figure 9, Item 5) and bracket (Figure 9, Item 9) from hood (Figure 9, Item 4).
5.
Remove two torsion bars (Figure 9, Item 1) from mounting brackets (Figure 9, Items 8 and 10).
TM 9-2320-272-23-4
0559
0559-14
Back to Top
