TM-9-2320-272-23-4
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 4 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-4 - Page 83 of 1393
HOOD CROSSMEMBER BRACKET INSTALLATION
1.
Install insulator (Figure 6, Item 8) and lower trunnion bracket (Figure 6, Item 6) on trunnion bracket
(Figure
6,
Item
2) with through bolt (Figure 6, Item 7), washer (Figure 6, Item 5), and locknut
(Figure
6,
Item
4). Tighten locknut to 96 lb-ft (130 N·m).
2.
Install trunnion bracket (Figure 6, Item 2) on hood crossmember (Figure 6, Item 3) with two lockwashers
(Figure
6, Item 1) and screws (Figure 6, Item 9).
3.
Install hood (WP
0565).
TM 9-2320-272-23-4
0559
0559-8
Back to Top
