TM-9-2320-272-23-4
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 4 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-4 - Page 91 of 1393
TORSION BARS AND CROSSMEMBERS INSTALLATION
NOTE
Coat hinges and hinge pins with GAA grease.
1.
Position two torsion bars (Figure 10, Item 1) in mounting brackets (Figure 10, Items 8 and 10).
2.
Install two torsion bars (Figure 10, Item 1) on mounting brackets (Figure 10, Items 8 and 10) with four screws
(Figure 10, Item 2) and locknuts (Figure 10, Item 7).
3.
Position hood (Figure 10, Item 4) with bracket (Figure 10, Item 9) and hinge (Figure 10, Item 6) and install
hinge pin (Figure 10, Item 5) and cotter pin (Figure 10, Item 3).
4.
Install hood (WP
0565).
TM 9-2320-272-23-4
0559
0559-16
Back to Top
