TM 9-2320-272-24-1
Table 2-3. Electrical Troubleshooting (Contd).
MALFUNCTION
TEST OR INSPECTlON
CORRECTlVE ACTION
Test 6. Test starter switch for continuity.
Step 1.
Disconnect lead 498 (pin S) at starter switch.
Step 2.
Connect multimeter positive lead to pin B and negative lead to pin S.
Step 3.
Place stark switch to START position and hold.
a.
Multimeter should indicate continuity. If continuity is not indicated, replace starter
switch (para. 3-107).
b.
If continuity is indicated, connect lead 5B to starter switch (pin B) and go to test 7.
2-114