TM-9-2320-272-24-3

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL; VOLUME 3 OF 4

JUNE 1998

TM-9-2320-272-24-3 - Page 172 of 799

TM 9-2320-272-24-3

4-67. FRONT WIRING HARNESS (M939A2) REPLACEMENT (Contd)

14.

15.

16.

17.

18.

19.

20.

21.

Install wire (15) and battery cables (16) and (14) on terminal clamp (3) with screw (17) and nut (13).

Install wire (12) and battery cable (10) on terminal clamp (2) with screw (11) and nut (9).

Install wire (6) and battery cables (7) and (8) on terminal clamp (1) with screw (5) and nut (4).

Install diagnostic connector (20) on mounting bracket (33) with two screws (32), new lockwashers (22),

and nuts (23).

Install cap chain (28) on mounting bracket (33) with screw (30), new lockwasher (25), and nut (24).

Install ground wire (21) on mounting bracket (33) with screw (31), new lockwasher (27), and nut (26).

Install cap (29) on diagnostic connector (20).

NOTE

Perform step 21 for M936A2 vehicles only.

Connect wire (19) to floodlight switch and auxiliary receptacle wire (18).

4-436