TM-9-2320-272-24-3

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL; VOLUME 3 OF 4

JUNE 1998

TM-9-2320-272-24-3 - Page 593 of 799

4-179. FRONT

TM 9-2320-272-24-3

Do not cross hoses during installation. Crossing hoses may result

in injury to personnel.

6.

Install hoses (1), (3), (5), (6), (7), and (8) on control valve (9).

NOTE

Cable clevises are installed the same.

7.

Install two cable clevises (2) on control valve (9) rod with clevis pin (4), washer (15), and new cotter

pin (16). Bend over end of cotter pin (16).

FOLLOW-ON TASKS:

Fill hydraulic oil reservoir (LO 9-2320-272-12).

Start engine (TM 9-2320-272-10) and check hydraulic pump operation.

4-857