TM-9-2320-272-24-3

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL; VOLUME 3 OF 4

JUNE 1998

TM-9-2320-272-24-3 - Page 632 of 799

4-187. FUEL

TM 9-2320-272-24-3

THIS TASK COVERS:

a. Removal

b. Installation

INITIAL SETUP:

APPLICABLE MODELS

REFERENCES TM

M9361A1/A2

TM 9-2320-272-10

TOOLS

TM 9-2320-272-24P

General mechanic’s tool kit (Appendix E, Item 1)

EQUIPMENT CONDITION

MATERIALS/PARTS

Parking brake set (TM 9-2320-272-10).

Four locknuts (Appendix D, Item 291)

Seven locknuts (Appendix D, Item 299)

Two lockwashers (Appendix D. Item 354)

1.

Remove four screws (l), locknuts (7), and fuel can holder (2) from upper bracket (6). Discard

locknuts (7).

2.

Remove two screws (3), washers (5), lockwashers (4), and lower bracket (8) from hydraulic oil filter

housing (10). Discard lockwashers (4).

3.

Remove seven locknuts (11) and screws (12) from upper bracket (6) and hydraulic oil reservoir (9).

Discard locknuts (11).

4.

Remove brackets (6) and (8) from oil reservoir (9).

1.

Position lower bracket (8) and upper bracket (6) on hydraulic oil filter housing (10) and install with

two new lockwashers (4), washers (5), and screws (3).

2.

Install bracket (6) on oil reservoir (9) with seven screws (12) and new locknuts (11).

3.

Install fuel can holder (2) on upper bracket (6) with four screws (1) and new locknuts (7).

4-896