TM-9-2320-273-10
TRUCK, TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER
TECHNICAL MANUAL; OPERATOR’S MANUAL
DECEMBER 2012
TM-9-2320-273-10 - Page 137 of 452
OPERATOR MAINTENANCE
OPERATION UNDER USUAL CONDITIONS
INITIAL SETUP:
References
AR 70-1
DA Form 2404
DA Form 5988-E
WP 0007
WP 0008
WP 0009
WP 0010
WP 0011
WP 0012
WP 0013
References - Continued
WP 0014
WP 0015
WP 0021
WP 0024
WP 0025
WP 0028
WP 0029
WP 0030
WP 0035
WP 0037
GENERAL
This work package provides instructions for operation of the vehicle under normal
conditions. It describes the process by which the operator utilizes the equipment and
the order in which operational tasks are performed. Operation Under Usual Conditions
includes Assembly and Preparation for Use; Initial Adjustments, Before Use, and
Self-Test; Operating Procedures; Decals and Instruction Plates; and Preparation for
Movement. Follow the instruction for each heading listed below.
WP 0007 through WP 0014 provide specific instructions for the operation of M915
series and M915A1 vehicles, and WP 0010 and WP 0013 provide additional
instructions for the operation of M915P1, M915A1P1, M916P1, M917P1, and M920P1
vehicles under normal conditions. For operating instructions under unusual conditions,
refer to WP 0015.
ASSEMBLY AND PREPARATION FOR USE
M915 series and M915A1 vehicles require minor preparation before operation. When
the vehicle is transferred between property accounts, Component of End Item (COEI)
and Basic Issue Items (BII) must be removed from the vehicle and packaged and
shipped separately. When the vehicle is received, COEI and BII must be unpacked and
stowed on the vehicle before operation. In some cases, one or more items may require
assembly and/or installation on the vehicle.
Perform the following steps prior to operating the vehicle:
1. Unpack COEI and BII and stow them in designated stowage locations. Stowage
locations are noted in WP 0037.
2. Ensure Service Upon Receipt of Materiel is performed by Field Maintenance and
all subsequent Field Level Maintenance is performed per the required service
intervals; refer to DA Form 2404 or DA Form 5988-E, Equipment Inspection and
Maintenance Worksheet.
TM 9-2320-273-10
0006
0006-1
Back to Top
