USE OF SEATBELTS
WARNING
Driver and companion seatbelts must be connected and
adjusted for proper fit prior to placing the vehicle in motion.
Failure to comply may result in injury or death to personnel.
Seek medical attention in the event of an injury.
Seatbelt must be completely extended from nonlocking
retractor device. All excess webbing must then be adjusted at
the buckle. Failure to comply may result in injury or death
to personnel. Seek medical attention in the event of an
injury.
1.
Fasten seatbelt buckle.
2.
Remove slack by slipping belt through buckle until it fits snugly.
3.
To release, press center of buckle on driver seatbelt, or pull up on belt buckle on
companion seatbelt.
END OF TASK
END OF WORK PACKAGE
Figure 3. Seatbelts.
DRIVER SEATBELT
BUCKLE RELEASE
COMPANION SEATBELT
BUCKLE RELEASE
TM 9-2320-273-10
0007
0007-5/6 blank