TM-9-2320-273-10

TRUCK, TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; OPERATOR’S MANUAL

DECEMBER 2012

  TM-9-2320-273-10 - Page 138 of 452

ASSEMBLY AND PREPARATION FOR USE - CONTINUED
3. If any auxiliary equipment will be used in conjunction with vehicle operation,
review the associated technical manuals for assembly and preparation for use
requirements of the auxiliary equipment.
END OF TASK
INITIAL ADJUSTMENTS, BEFORE USE, AND SELF-TEST
Perform the following checks prior to vehicle operation:
1. Check fuel level and fill fuel tank as necessary (WP 0028).
2. Check fluid levels for the following components and add proper fluids as
necessary:
a. Engine oil (WP 0035)
b. Engine coolant (WP 0029)
c. Transmission fluid (WP 0035)
d. Power steering fluid (WP 0035)
e. Windshield washer fluid (WP 0025)
3. Check battery terminal connections and battery voltage (WP 0025).
4. Check fire extinguisher for full charge (WP 0025).
5. Check tire pressure including spare tire (WP 0030).
END OF TASK
OPERATING PROCEDURES
WARNING
This vehicle has been designed to operate safely and
efficiently within the limits specified in the TM in
accordance with (IAW) AR 70-1. Operation beyond these
limits without written approval from the Commander, U.S.
Army TACOM Life Cycle Management Command, ATTN:
AMSTA-CG, Warren, MI 48397-5000, is prohibited. Failure
to comply may result in serious injury or death to personnel.
Seek medical attention in the event of an injury.
Operators must know how to use the controls and indicators
before starting and driving the vehicle. In addition, operators
must know the capabilities and limitations of the vehicle and
be able to use the features of the vehicle in the safest and
most efficient way to accomplish their mission. Failure to
comply may result in damage to equipment and possible
injury or death to personnel. Seek medical attention in the
event of an injury.
TM 9-2320-273-10
0006
0006-2


Back to Top