TM-9-2320-273-10
TRUCK, TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER
TECHNICAL MANUAL; OPERATOR’S MANUAL
DECEMBER 2012
TM-9-2320-273-10 - Page 141 of 452
OPERATOR MAINTENANCE
SEAT AND SEATBELT OPERATION
INITIAL SETUP:
References
WP 0005
GENERAL
WARNING
The driver and passenger must wear seatbelts during vehicle
operation. Ensure seatbelts are fastened and properly
adjusted before placing vehicle in motion. Failure to comply
may result in injury or death to personnel. Seek medical
attention in the event of an injury.
NOTE
All seat and seatbelt adjustments are performed while
occupant is seated in normal driving position with feet flat
on cab floor and hands on steering wheel. Ensure driver seat
is adjusted for comfort and all controls are easily accessible.
The vehicle is equipped with an adjustable driver seat and either a two-point lap
seatbelt or three-point lap and shoulder harness seatbelt. The companion seat is also
adjustable and has a two-point lap seatbelt. The driver seat can be adjusted in three
ways: ride level, backrest angle, and forward and backward. Ensure the driver seat is
adjusted for comfort and ensure all controls are within easy reach prior to operating the
vehicle.
For description and use of controls associated with the operation of the driver and
companion seats and seatbelts, refer to WP 0005.
TM 9-2320-273-10
0007
0007-1
Back to Top
