TM-9-2320-273-34

TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1980

  TM-9-2320-273-34 - Page 103 of 801

TM 9-2320-273-34
2-17. Pusher Axle (M917, M919, M920).
a. Removal.
(1)
With pusher axle UP/DOWN selector in DOWN position, turn pusher axle CONTROL
PRESSURE knob counterclockwise to exhaust system air pressure. Drain air tank (TM 9-2320-273-20).
(2) M920 – Raise walk plate (1, fig. 2-52) as follows:
(a)
Loosen nut (2) on two rear J-bolts (3) and disconnect each J-bolt from vehicle
(b)
Loosen nut (7) on two forward J-bolts (6) and disconnect each J-bolt from vehicle
frame.
frame.
(c)
Remove screw (4), air line clamp (5) and lift off walk plate. (1).
LEGEND:
1.
WALK PLATE
2. NUT (2)
3. J-BOLT (2)
4. SCREW
5. CLAMP
6. J-BOLT (2)
7. NUT (2)
Figure 2-52 Raise/Lower Walk Plate.
2-87


Back to Top