TM-9-2320-273-34

TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1980

TM-9-2320-273-34 - Page 110 of 801

TM 9-2320-273-34

(16)

Place tandem roller lifts (fig. 2-59)

(17)

RoII pusher axle assembly towards

on both right and left sides.

rear; then out from under vehicle.

TA 073997

Figure 2-59. Place Wheels on Tandem Roller Lifts.

b. Installation.

(1)

Place tandem roller lifts (fig. 2-59) on both left and right sides.

(2)

Using a vertical crane or suitable hoist, raise rear of vehicle high enough to allow pusher axle

assembly to be rolled under side of vehicle.

(3)

Place hydraulic jack in position to support pusher axle assembly (fig. 2-56).

NOTE

In step 4, install only seven capscrews on

model M920. Leave the front mounting

hole for capscrew (1, fig. 2-58) blank at

this time.

(4)

Line

UP

mounting holes in pusher axle and vehicle frame; then install eight capscrews (1),

(2), (3), and (5).

(5)

Install four allen-head capscrews (4).

(6)

push the forward air reservoir support hanger bolts (fig. 2-57) through the vehicle frame;

then secure the hanger with two nuts.

2-94