TM-9-2320-273-34

TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1980

TM-9-2320-273-34 - Page 117 of 801

TM 9-2320-273-34

TA 239524

Figure 3-3. Fuel Tank Step.

e.

Air dry fuel tank to remove any remaining moisture. Using shop air supply place air hose through

filler neck and air exhaust for about five minutes.

f.

Install fuel sending unit, drain plug, inlet fuel line, return fuel line and air vent screw (4, 1,3, 5

and 2, fig. 3-4).

g.

h.

off with

Refuel tank and install filler cap. Relocate vehicle to a painting facility.

Wash welded area with enamel thinner and treat with a metal conditioner (phosphoric acid). Rinse

clean water and air dry.

Change 2

3-5