TM-9-2320-273-34
TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
DECEMBER 1980
TM-9-2320-273-34 - Page 121 of 801
TM 9-2320-273-34
NOTE
Be sure surface to be welded is free
from oil, grease, moisture and any heavy
oxide coatings.
e.
OiI or grease can be removed by wiping affected area with drycleaning solvent.
f.
Heavy oxides can be removed with wire brush or emery cloth.
3-11. Installation.
WARNING
Eye protection must be worn by all per-
sonnel while welding is being performed.
NOTE
Use MIG weld with 5356 welding wire
for all welding on the fuel tank step.
a.
Mark location of new bottom step using scribe or marking pencil.
b.
Using an assistant, butt the
flange ends of step to the surface of
new step to the marked position on the fuel tank. Tack weld front
fuel tank (fig. 3-7).
TA 239528
Figure 3-7. Fuel Tank Step.
Change 2
3-9
Back to Top
