TM 9-2320-273-34
b. Adjustment:
NOTE
Prior to adjusting the voltage regulator,
associated wiring, connections, and drive
belt, tension must be checked and repaired
if needed. The batteries must also be fully
charged.
(1) Start the engine and run at fast idle (1,200 rpm) with the transmission in neutral.
(Refer to TM 9-2320-273-10.)
(2) Turn off all vehicle electrical loads.
(3) Connect a voltmeter across the batteries as shown in figure 5-1.
Figure 5-1. Connect Voltmeter.
5-2
TA 073999