TM 9-2320-273-34
(2)
Remove the two nuts and Iockwashers retaining resistor assembly to the transformer-
rectifier mounting plate (left side viewed from transformer-rectifier end) (fig. 5-4).
TA 074002
Figure 5-4. View of Resistor Mounting.
NOTE
In step (3), note the location of the
mounting screws to aid in assembly.
(3)
Remove four mounting sockethead screws and Iockwashers, and remove the transformer-
rectifier and resistor (fig. 5-5).
(4)
Disconnect resistor lead from the positive terminal on the alternator.
(5)
Remove mounting plate by removing three sockethead screws and two spacers.
5-5