TM-9-2320-273-34

TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1980

TM-9-2320-273-34 - Page 141 of 801

TM 9-2320-273-34

(12)

Remove the positive and negative terminal bolts (fig. 5-13) noting location of the red and black

leads; then remove the two screws, Iockwashers, guardwashers, and insulating washers which retain the

lower end of the heatsinks. Remove the heatsinks.

TA 074011

Figure 5-13. Heatsink Removal.

(13)

pry flanged dust cap out of the end housing (fig. 5-14).

(14)

Inspect slipring end bearing. If defective, press bearing from the inside of the housing

outward using the following tools: No. CG40-11 and No. CG40-4.

5-13