TM 9-2320-273-34
(3)
Remove four screws and carefully lift regulator and gasket free of housing (fig. 5-8).
Disconnect the red and black leads from the regulator, noting their positions to facilitate reassembly.
(4)
Remove lead from diode trio to terminal on regulator housing. Loosen the inner nut
to allow the blue regulator lead to be withdrawn from under the terminal screw. Remove the regulator.
(5)
Lift two brush and spring assemblies out of housing.
TA 074006
Figure 5-8. Regulator and Brush and Spring Removal.
(6)
Remove three nuts and lift diode trio off ac terminal studs (fig. 5-9).
(7)
Remove three self-locking nuts and throughbolts.
5-8