TM-9-2320-273-34
TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
DECEMBER 1980
TM-9-2320-273-34 - Page 94 of 801
TM9-2320-273-34
c. Installation Procedure.
Omit step (11) in para 2-14c and perform the following additional tasks
prior to road testing vehicle.
(1) Connect auxiliary power steering cylinder (TM 9-2320-273-20) and secure with washer
and nut. Tighten nut to 110-125 Ib-ft (150-170 N-m) torque and install cotter pin.
(2) Connect propeller shaft to axle differential (Refer to TM 9-2320-273-20).
(3) Replenish axle differential oil supply. (Refer to LO 9-2320-273-12.)
2-16. Rear Tandem Axle and Equalizer Beams.
a. Removal.
(1) Disconnect air line at forward rear axle differential lockup air chamber (fig. 2-46).
(2) Disconnect air lines as follows:
(a)
M915. Disconnect air lines from forward rear axle at the quick-release valve and tee
connection (fig. 2-47). Tag for location.
(b)
M916
thru M920.
Disconnect air lines from forward rear axle at the quick-release
valve and tee connection. Tag for location.
2-78
Back to Top
